The first synthetic diamonds were produced by General Electric in 1954. A synthetic diamond is basically a rock that has the durability, refractive index and hardness of a natural diamond – but it is made by man. A synthetic diamond should not be confused with stimulant diamonds, such as glass, cubic zirconia, or moissanite.
Although the technology for synthetic diamonds came into play in 1954, no synthetic diamonds were ever seen on the market until the 1990’s. This was due to the fact that it took many years for General Electric to produce a synthetic diamond that could compare with the quality of a natural diamond – and when they figured out how to do it, they found that it cost more to produce a synthetic diamond than it did to mine and cut natural diamonds.
Finally, a small company by the name of Gemesis Corporation figured out a way to produce synthetic diamonds that were of the same quality as natural diamonds, at a cheaper price. Today, Gemesis produces synthetic white diamonds, and colored diamonds as well. These diamonds sell for about 1/3 of the cost of a natural diamond, but there is a shortage of them, and they are hard to find. In fact, it seems that synthetic diamonds are rarer than natural diamonds!
Diamond Related Articles
- American Topaz
- Corundum
- Diamond 4Cs
- Diamond Durability
- Diamond Mines
- Diamonds As Electrical Insulators
- Gemstones are Mineral Crystals
- How Diamond Prices Are Determined
- How Diamonds Are Made
- How Diamonds Are Mined
- How to Buy Diamond Engagement Rings
- How to Care for Your Diamond
- How to Clean your Diamonds
- How to Sell A Diamond
- How to Spot A Fake Diamond
- Industrial vs Gem Quality Diamonds
- Insuring Your Diamonds
- Ruby and Sapphire Gems
- Synthetic Diamonds
- Victoria Transvaal Diamond
Diamonds are graded for certification by laboratories using grading criteria. Four of these criteria are critical to understand when making a diamond purchase or investment. Known as the “Four C’s” these criteria are: color, cut, clarity and carat.
Color is the result of the composition of a diamond and it does not change. When a jeweler is describing the color of a diamond they are referring to the presence or absence of color in white diamonds. Because a diamond with no color allows maximum light to pass through, colorless diamonds are preferred for their sparkle.
Cut refers to a diamonds reflective quality. Most diamonds are cut with 58 facets. The brilliance of diamonds is heavily dependent on the cut. The different angles and the finish of a diamond determine its ability to reflect light and cause its brilliance and fire. Remember that the cut of a diamond can have an impact on its durability as well as its beauty. Some cutting faults can make a diamond prone to breakage. A diamond that is cut too thin can also cause light to leak out of the back and the diamond will lose some of the sparkle and appear not to shine. So, as you can see the Cut is probably the most important of the Four C’s.
During the formation process, inner flaws, or inclusions occur in most diamonds. The number and size of these inclusions determine what is referred to as the clarity of a diamond. Diamonds that are clear create more brilliance and therefore are rarer and highly priced. To be considered “flawless”, a diamond must have no surface or internal imperfections visible upon being viewed by a skilled diamond grader using 10 power magnifications.
Carat is the unit of weight by which diamonds are measured. One carat is equal to 200 milligrams. A carat is divided into 100 segments called points. 150 points would equal one and a half carats.
When you go to the store to make that all important diamond purchase, do not be shy! Ask questions, get the answers needed to make an informed purchase. Shopping for certified diamonds enables you to make an informed selection. Knowing the “four C’s” allows you to comparison shop and purchase the best diamond at a fair price. But, before making a purchase, shop around and decide what shapes and styles really appeal to you. Enjoy your diamond for years to come!
Diamond Related Articles
- American Topaz
- Corundum
- Diamond 4Cs
- Diamond Durability
- Diamond Mines
- Diamonds As Electrical Insulators
- Gemstones are Mineral Crystals
- How Diamond Prices Are Determined
- How Diamonds Are Made
- How Diamonds Are Mined
- How to Buy Diamond Engagement Rings
- How to Care for Your Diamond
- How to Clean your Diamonds
- How to Sell A Diamond
- How to Spot A Fake Diamond
- Industrial vs Gem Quality Diamonds
- Insuring Your Diamonds
- Ruby and Sapphire Gems
- Synthetic Diamonds
- Victoria Transvaal Diamond